How much does soffit and fascia repair cost?
Soffit and fascia repair in Florida runs roughly $6–$20 per linear foot, according to industry cost data from sources like HomeGuide and Angi — so a typical repair often lands around $300–$1,000, with larger replacements costing more. Material, height, and how far the rot has spread drive the price. These roofline boards take a beating in Florida: humidity plus water from clogged gutters and roof leaks rots wood fascia and soffit, and the damp wood invites pests. Catching it early keeps a small repair from becoming a big one.
Key takeaways
- Fascia and soffit repair runs about $6–$20 per linear foot; a typical repair is $300–$1,000.
- Moisture from humidity, clogged gutters, and roof leaks is what rots them in Florida.
- Fascia holds the gutters; soffit seals and ventilates the underside of the roof edge.
- Aluminum and PVC resist rot — popular replacements for rotted wood here.
- Ignored damage spreads, letting in water and pests and hurting attic ventilation.
Table of contents
- What repair costs
- Soffit vs. fascia
- Why they rot in Florida
- Warning signs
- Wood vs. aluminum vs. PVC
- Where to start
- FAQ
What repair costs
Soffit and fascia work is priced per linear foot, with material and access as the variables. Here's the 2026 picture:
| Work | Typical cost | Notes |
|---|---|---|
| Fascia repair/replace | ~$6–$20 / linear ft | Higher for two-story access |
| Soffit repair/replace | ~$6–$20 / linear ft | Vented panels |
| Typical repair job | ~$300–$1,000 | A damaged section |
| Full perimeter replacement | several thousand | Whole roofline |
A worked example: replacing a rotted section of fascia where a gutter overflowed on an Orlando home lands in the few-hundred-dollar range, while redoing the entire roofline's soffit and fascia (often done with a re-roof or gutter project) runs into the thousands. Two-story homes cost more for the access. Catching one rotted board early is far cheaper than letting it spread down the run.
Soffit vs. fascia
These two work together at the roof edge, and it helps to know which is which. The fascia is the vertical board running along the edge of the roof — it caps the rafter ends, gives the roofline a finished look, and is what your gutters attach to. The soffit is the underside panel between the roof edge and the exterior wall — and crucially, soffit panels are usually vented, providing the intake airflow that ventilates your attic.
Together they seal and ventilate the roofline, keeping water and pests out while letting the attic breathe. When either fails, you lose that protection: damaged fascia lets water into the roof structure and can drop your gutters; damaged soffit lets in water, insects, and even rodents, and disrupts attic ventilation.
Why they rot in Florida
Florida is hard on wood at the roofline. The culprit is moisture, from several sources at once: the state's high humidity, water from clogged or overflowing gutters spilling behind the fascia, and roof leaks wicking into the boards. Wood fascia and soffit absorb that moisture and rot — and the damp, decaying wood becomes an entry point and a food source for pests and wood-destroying insects.
This is why fascia problems and gutter problems go hand in hand: clogged gutters that overflow are one of the leading causes of fascia rot, since the water has nowhere to go but down the boards. Keeping gutters clean and fixing roof leaks promptly is the best prevention. In this climate, wood at the roofline needs either diligent maintenance or a rot-resistant material.
Warning signs
Catch fascia and soffit damage early by watching for:
- Peeling paint or visible water stains on the fascia or soffit
- Soft, spongy, or crumbling wood when touched (rot)
- Sagging gutters pulling away from the fascia
- Gaps or holes in the soffit (and signs of pests or wasps using them)
- Daylight or moisture visible in the attic at the eaves
- Animal or insect activity around the roofline
Any of these means it's time to look closer. Because rot spreads along the boards and into the roof structure, addressing one damaged section early prevents a much larger, more expensive repair — and keeps pests from getting established in the attic through a soffit gap.
Wood vs. aluminum vs. PVC
When repairing or replacing, the material choice matters in Florida:
| Material | Upkeep | Notes |
|---|---|---|
| Wood | High — seal & paint | Traditional look; rots without maintenance |
| Aluminum | Low | Rot-proof, common for soffit/fascia wraps |
| PVC / composite | Low | Rot-proof, durable, paintable |
Wood gives a traditional look but, as covered, rots in Florida's humidity unless kept sealed and painted. Aluminum and PVC/composite resist rot and need little maintenance, which is why many Florida homeowners replace rotted wood with these — or wrap wood fascia in aluminum — to avoid repeat rot. The low-maintenance materials cost a bit more upfront but save the ongoing upkeep and the next rot repair. It's the same humidity logic behind choosing rot-resistant fencing here.
Where to start
Start by inspecting your roofline for peeling paint, soft wood, and sagging gutters, especially where gutters tend to overflow. Because soffit and fascia tie into the roof, our roofing directory and Orlando city page are good starting points, with more across the full directory. Fix the moisture source (clean gutters, repair leaks), consider rot-resistant aluminum or PVC for the repair, and don't let one rotted board spread — it's much cheaper caught early, often alongside gutter or roof work.
FAQ
How much does fascia and soffit repair cost? Industry cost data puts fascia and soffit repair around $6–$20 per linear foot, so a typical repair often runs $300–$1,000 and a larger replacement more. Material, height, and the extent of rot drive the price.
What causes fascia and soffit to rot in Florida? Moisture — Florida's humidity plus water from clogged or overflowing gutters and roof leaks. Wood fascia and soffit absorb that moisture and rot, and the damp wood attracts pests and wood-destroying insects.
What's the difference between soffit and fascia? Fascia is the vertical board along the roof edge that gutters attach to; soffit is the underside panel between the roof edge and the wall, which also vents the attic. Both protect the roofline from water and pests.
Should I repair with wood, aluminum, or PVC? Aluminum and PVC resist rot and need little maintenance, making them popular in humid Florida. Wood looks traditional but must be kept sealed and painted. Many homeowners replace rotted wood with aluminum or PVC to avoid repeat rot.
Why does soffit and fascia matter? They seal and ventilate the roofline. Damaged fascia lets water into the roof structure and detaches gutters; damaged soffit lets in water, pests, and rodents, and hurts attic ventilation. Small damage spreads if ignored.